MEB2NLE-50 C10 1P+N RCBO Mai Rage Wutar Lantarki Mai Aiki da Wutar Lantarki

Takaitaccen Bayani:

Mai Kare Wutar Lantarki Mai Aiki da Saura (RCBO) wani mai katse wutar lantarki ne mai kariyar kwararar wutar lantarki, kariyar wuce gona da iri, da kuma ayyukan kariyar gajerun da'ira. Ana amfani da shi galibi a fannin kariyar layin lantarki inda akwai haɗarin zubewa. Gabaɗaya, irin waɗannan layukan suna aiki a cikin yanayi masu rikitarwa. Ko kuma haɗa na'urori da yawa na lantarki.

Aika mana imel

Cikakken Bayani game da Samfurin

Alamun Samfura

Cikakkun Bayanan Samfura

• Bin Dokoki: IEC61009-1,AS/NZS 61009.1:2015
• Takaddun shaida: CE,CB,SEMKO
• Nau'i (nau'in raƙuman ruwa na ɓuɓɓugar ƙasa): AC, A
• Adadin sandunan (P): 1+N
• An ƙididdige halin yanzu a cikin (A): 6, 10, 16, 20, 25, 32, 40, 50
• Mita da aka ƙima (Hz): 50/60
• Ƙarfin wutar lantarki mai ƙima Ue (VAC): 230
• Ƙarfin wutar lantarki mai ƙima na UI (VAC): 500
• Ragewar wutar lantarki mai ƙarfi I△n (mA): 30,100, 300
• Ƙarfin karyewa da aka ƙima ac.to IEC61009 ultimate Icn (kA): 6
• Ƙarfin karyewa da aka ƙima bisa ga IEC60947-2 ultimate IA m (kA): 10
• Ƙarfin karyewar ragowar I△m (kA): 6
• Ƙarfin wutar lantarki mai jure matsin lamba Uimp: 4kV
• An ƙima aikin: Aikin da ba a katse shi ba
• Gwajin ƙarfin lantarki na Dielectric a ind.freq. na minti 1.(kV): 2.5
• Juriyar wutar lantarki (wave 8/20)(A): 3000
• Halayen Taɓawa: B,C:
Halayen B(Cikin): 3-5
Halayen C(Cikin): 5-10
• Rayuwar wutar lantarki (lokutan aiki): 4000
• Rayuwar injina (lokutan aiki): 100000
• Matakin kariya: IP20, tare da masu haɗa na'urori
• Matsayin hawa: Duk wani
• Sassan haɗin gwiwar mai gudanarwa:
Tauri da kuma mannewa (mm2): 0.75-35
An ɗaure shi da kyau tare da hannun riga na ƙarshe (mm2): 0.75-25
• Tashoshi:
Ƙarfin matsewa na tashar (Nm): 2.8
• Yanayin zafi (oC): -25~+45, matsakaicin zafi shine 95%
• Zafin ajiya (oC): -40~+75
• Matsakaicin Tsawon (mita): 2000

Lanƙwasa

Girman Bayani da Shigarwa (mm)

Lura da Haɗin Lantarki:

1. Dole ne a tabbatar da cewa an shigar da RCBOs daidai lokacin shigarwa
- Idan aka ba da ƙarfin RCBO, tabbatar da aikin RCD na RCBO aƙalla sau biyu ta hanyar amfani da maɓallin gwaji ko ta amfani da kayan aikin gwaji na musamman
- A dukkan lokuta, za a tabbatar da ware dukkan sandunan da aka sauya bayan RCBO ta yi aiki don cire haɗin da aka ƙayyade.
- Za a tabbatar da keɓance dukkan sandunan ta hanyar gwajin ƙarfin lantarki ko kuma, bayan cire wadata, ta hanyar duba ci gaba ta kowace sanda.
2. Tabbatar babu wutar lantarki ko wutar lantarki da aka haɗa yayin shigarwa don guje wa girgizar lantarki kuma tashar N za a iya haɗa ta ne kawai da layin tsaka-tsaki.
3. Kada a haɗa waya mai rai zuwa waya mai rai ko waya mai rai zuwa mara tsaka-tsaki kai tsaye a kowane yanayi don guje wa cutarwa ta mutum.
4. Yi amfani da ƙarfin juyi na 2.0Nm kuma ka tabbatar an matse wayoyin sosai.
5. An yi amfani da hannu mai laushi sosai yayin shigarwa
6. Da fatan za a yi amfani da kariyar rufi don wayoyi da aka fallasa ko sandar bus ta jan ƙarfe don guje wa gajeriyar da'ira

Ana cire RCBO daga layin dogo na DIN, bayan an sanya sandar bas

Aikace-aikace

Ragowar na'urar RCBO (Residual Current Operated Circuit Breaker) ƙwararru ne kuma ana amfani da su sosai a gine-gine, gidaje, aikace-aikacen masana'antu, da kuma watsa wutar lantarki.